Products
Mu-Tron III Power Supply Remake
Charge Pump Mu-Tron III Power Supply
Mu-Tron Bi-Phase Dual Foot Switch Remake
Mu-Tron Bi-Phase Control Pedal Remake
Mu-Tron III Power Supply Remake $49 :
This is a remake of the PS-1 power supply for the
Mu-Tron III with a clear blue case. This power supply uses the same tried and tested
circuitry of the original, with the exception of a wall type
transformer and the rectifier configuration. It has improved power filtering and a blue LED power indicator. The above picture is the complete power supply setup with wall transformer. It has a 3D printed 3 pin plug made from high temp PLA filiment.
It plugs into the 3 pin jack in the middle on the back of
the Mu-tron III. The wall transformer's 2.1mm plug connects
to a jack on the power supply box. Some of the very early Mu-tron III's
do not have the 3 pin jack.
Note: This power supply is not for "Haz Labs"
products.
The power supply sells for $49 + $10 shipping/
handling + sales tax if you live in California. If not using PayPal please send a
check or money order for $59 + sales tax if in California. I
can accept check, money order or PayPal.
Quantities are limited. USA orders only. Will
ship only within the United States.
Top of page
Charge Pump Power Supply For The Mu-Tron III $59 :
This version of the power supply is for use with standard 9 or 9.6 volt DC pedal board power ( 2.1mm negative center connector ).
It uses a charge pump chip to get the needed negative 9 volts DC.
It is in a clear blue case, has power filtering and a blue LED power indicator. It has a 3D printed 3 pin plug made from high temp PLA filiment.
It plugs into the 3 pin jack in the middle on the back of
the Mu-tron III. The 2.1mm cable included connects from your pedal board power
to a jack on the power supply box. Some of the very early Mu-tron III's
do not have the 3 pin jack. Wall transformer not included.
Note: This power supply is not for "Haz Labs"
products.
The power supply sells for $59 + $10 shipping/
handling + sales tax if you live in California.
Quantities are limited. USA orders only. Will
ship only within the United States.
Top of page
Mu-Tron
Bi-Phase
Foot Controller Remake $160 :
This modified control pedal is for use with the Mu-Tron Bi-Phase. It connects to the five pin
jack on the Bi-Phase. It is sold complete with two foot switches.The left foot switch activates the “A” phaser bank and has an amber LED. The right foot switch activates the “B” phasor bank and has a blue LED. The switch on the bottom should be set to “other” and the pot on the left side of the pedal should be turned all the way to the left.The
Bi-Phase Foot Controller sells for $160 + $15 Shipping/Handling + sales
tax if in California. I
can accept check, money order or PayPal.
Quantities are limited. USA orders
only. Will ship only within the United States
Top of page
Mu-Tron
Bi-Phase Dual Foot Switch Remake $49 :
This dual foot switch connects directly to the five pin jack on the
Bi-Phase. It is used to turn on and off the two phasor banks. The Bi-Phase Dual Foot Switch sells for $49 +
$10 Shipping/Handling + sales tax if in California. I can accept check, money order or PayPal.
Quantities
are limited. USA
orders only. Will ship only within the United States
Top of page
Products
Mu-Tron III Power Supply Remake
Charge Pump Mu-Tron III Power Supply
Mu-Tron Bi-Phase Dual Foot Switch Remake
Mu-Tron Bi-Phase Control Pedal Remake
Mu-Tron III Power Supply Remake $49 :
This is a remake of the PS-1 power supply for the
Mu-Tron III with a clear blue case. This power supply uses the same tried and tested
circuitry of the original, with the exception of a wall type
transformer and the rectifier configuration. It has improved power filtering and a blue LED power indicator. The above picture is the complete power supply setup with wall transformer. It has a 3D printed 3 pin plug made from high temp PLA filiment.
It plugs into the 3 pin jack in the middle on the back of
the Mu-tron III. The wall transformer's 2.1mm plug connects
to a jack on the power supply box. Some of the very early Mu-tron III's
do not have the 3 pin jack.
Note: This power supply is not for "Haz Labs" products.
The power supply sells for $49 + $10 shipping/ handling + sales tax if you live in California. If not using PayPal please send a check or money order for $59 + sales tax if in California. I can accept check, money order or PayPal.
Quantities are limited. USA orders only. Will ship only within the United States.
Top of page
Charge Pump Power Supply For The Mu-Tron III $59 :
This version of the power supply is for use with standard 9 or 9.6 volt DC pedal board power ( 2.1mm negative center connector ).
It uses a charge pump chip to get the needed negative 9 volts DC.
It is in a clear blue case, has power filtering and a blue LED power indicator. It has a 3D printed 3 pin plug made from high temp PLA filiment.
It plugs into the 3 pin jack in the middle on the back of
the Mu-tron III. The 2.1mm cable included connects from your pedal board power
to a jack on the power supply box. Some of the very early Mu-tron III's
do not have the 3 pin jack. Wall transformer not included.
Note: This power supply is not for "Haz Labs" products.
The power supply sells for $59 + $10 shipping/ handling + sales tax if you live in California.
Quantities are limited. USA orders only. Will ship only within the United States.
Top of page
Mu-Tron Bi-Phase Foot Controller Remake $160 :
This modified control pedal is for use with the Mu-Tron Bi-Phase. It connects to the five pin jack on the Bi-Phase. It is sold complete with two foot switches.The left foot switch activates the “A” phaser bank and has an amber LED. The right foot switch activates the “B” phasor bank and has a blue LED. The switch on the bottom should be set to “other” and the pot on the left side of the pedal should be turned all the way to the left.The Bi-Phase Foot Controller sells for $160 + $15 Shipping/Handling + sales tax if in California. I can accept check, money order or PayPal.
Quantities are limited. USA orders only. Will ship only within the United States
Top of page
Mu-Tron Bi-Phase Dual Foot Switch Remake $49 :
This dual foot switch connects directly to the five pin jack on the Bi-Phase. It is used to turn on and off the two phasor banks. The Bi-Phase Dual Foot Switch sells for $49 + $10 Shipping/Handling + sales tax if in California. I can accept check, money order or PayPal.
Quantities are limited. USA orders only. Will ship only within the United States
Top of page